MG1/MD1 and Tool32

MG1/MD1 Tool32 ISN replace
Everything will become clear if you read carefully.
Do not do "crazy" actions!
Required: DME_BX8.prg and Tool32
1. Open Tool32 and load DME_BX8.prg
2.Go to “steuern_ews4_sk”

First get used DME isn and run this:
UNLOCK_CLIENT_SK;(used dme isn)ISN;DME
After “unlocked” then write new ISN:
WRITE_CLIENT_SK;(new isn)ISN;DME
WRITE_SERVER_SK;(new isn)ISN;DME
LOCK_CLIENT_SK;(new isn)ISN;DME
LOCK_SERVER_SK;(new isn)ISN;DME
Easy?This are not secret.All this command’s show in tool32 when open PRG file:

EWS 5 - Some additions
DME MG1/MD1
Read ISN from OEM dump from hex convert to decimal
(how? if you don’t know stop here)
Open tool32
Open DME project “DME8FF”
Status Lesen -> ARG;EWS_DME_LESEN
In this case if ISN is different you will see “STAT_ISN_PRESENT” if ISN is not resetted actual value is 01 if it is resetted Actual value will be 00
Flash and Encode your new DME with esys first
Disable all FSC by FSC tab
Change vin in VCM 00000000000000000
Open MG1 WRK.TST (its calculator) (Move your ass and find that file)
First Line Working Hour
Second line ISN
You can copy your old ISN “used DME” and save it for emergency
Than you need to extract from old DME your own ISN.
Open Transmitter input “12 or 13” depends from your DME if master is 12 if slave is 13 use as your target to connect
Than in right side you have Diag msg paste your ISN from your DME than click send to write down your ISN inside
Than go back in tool32 status lesen=ARG;EWS_DME_LESEN check if your DME calue is 00 instead of 01
Everything will become clear if you read carefully!!!
Don't play with people's nerves by asking "stupid" questions !!!
Everything is made clear!
The next trip will be more "interesting"!
15.08.2024
www.bmw-az.info
Download DME_BX8.prg:
Download PDF:
Replace ISN by DUMP MG1/MD1: GO TO LINK!!!
You must register to DOWNLOAD the content. The fee is $100.
It is a one-time payment.
Please e-mail: [email protected]
Toil and suffering must be respected!



Some News

User Panel
Categories
Donate!
